In the current Ontario development landscape, infrastructure capacity is no longer a given: it is the primary gatekeeper of your project's timeline. Municipalities face increasing pressure on existing water, sanitary, and storm systems. Before any shovel hits the ground, the #1 question a municipality will ask is: Can our systems handle your development?
Securing an approval requires more than just submitting drawings; it requires proving that your project integrates seamlessly with municipal infrastructure through data-driven design.
Site Servicing Plans: Beyond Simple Connections
A Site Servicing Plan is the blueprint for how your development breathes. It isn't just about showing where pipes go; it’s about constructible routing and coordinated design.
At Reliance Engineering, we prioritize clean layouts that minimize conflicts between utilities. Municipal reviewers look for:
- Capacity Confirmation: Does the existing water main have the pressure for your fire flow requirements?
- Sanitary Flow: Will the downstream sewers reach a "bottleneck" because of your added density?
- Utility Coordination: Are gas, hydro, and telecommunications lines clashing with your proposed water and sewer routes?
By providing clear, error-free designs, we reduce the "back-and-forth" with municipal engineers, often cutting months off the approval process.
Stormwater Management: Precision in Every Calculation
Effective Stormwater Management (SWM) Reports are critical for protecting both your site and the surrounding community. With the increase in extreme weather events, Ontario municipalities have tightened their criteria for peak flow control and water quality.
Our approach focuses on clear calculations and practical controls. We don't just solve for today's storm; we design for long-term viability. Key elements of our SWM reports include:
- Quantity Control: Using detention tanks or ponds to ensure post-development runoff does not exceed pre-development levels.
- Quality Control: Implementing Oil-Grit Separators (OGS) or LID (Low Impact Development) features to filter pollutants.
- Water Balance: Ensuring groundwater recharge remains consistent with local environmental requirements.
The Functional Servicing Report (FSR): Your Project’s Executive Summary
The Functional Servicing Report is the document that ties everything together. It is a comprehensive infrastructure analysis that justifies your project to the municipality.
An FSR prepared by Reliance Engineering provides a high-level overview of how site grading, servicing, and stormwater management work in unison. It uses municipal experience to anticipate concerns before they are raised. If the existing municipal pipe is undersized, our FSR identifies this early and proposes viable engineering solutions, such as on-site storage or local upgrades, to keep the project moving forward.
The Reliance Engineering Advantage
With over 20 years of principal engineering experience, Naresh Ochani, P.Eng. M.Eng., leads a team that understands the nuances of Ontario’s municipal requirements. We don't just provide drawings; we provide approval support.
Our precision often results in approvals within a single submission round. We take full ownership of our clients' needs, ensuring that every Site Plan Approval (SPA) or Building Permit (BP) drawing is permit-ready and buildable.
Professional Credentials
Naresh Ochani, P.Eng. M.Eng.
PEO Certificate of Authorization: 100548882
Contact Information
Reliance Engineering
6850 Millcreek Dr,
Mississauga, ON L5N 2H4
Phone: 647-385-6418
Email: [email protected]
Website: www.relianceengineering.ca
Office Hours
- Saturday: 12:00 PM – 2:00 PM
- Sunday: Closed
- Monday – Friday: By Appointment
